Binary options buddy 3.0

Include buddy parameters by right clicking on the application short cut in the Start Menu and add them to the target path.

This can be useful when used with custom commands and scripts. The free options included in MCEBuddy has a speed limitation of 30fps for h video i. If the video appears to get cut for about 3 seconds after the commerical ends i.

Remove the -ss 3 from binary video parameters to fix this issue. Refer to the Audio Sync Issues section at the end of this document for details on the -ss command. This only works with FFMPEG based profiles and if the source file has multiple audio tracks. MCEBuddy supports ShowAnalyzer version and greater. Once you download and install ShowAnalyzer it will show up as an option on the conversion profile settings page under commerical detection. Filename and Showname Pattern Matching v MCEBuddy supports multiple wildcard name matching to buddy shownames and filenames using the ; operator.

If you want to specify a name avoid list, i. To provide a regex expression prefix the regex matching pattern with regex: and then the regex pattern this is a very advanced concept. Refer to Filename and Showname Pattern Matching above to understand how to create patterns for filename and shownames.

You can create multiple conversions tasks in MCEBuddy. Each conversion task will process each file in the queue. Order of conversions tasks do not matter when creating filename and showname filters. To do so you will first create 3 conversion tasks. This tell the conversion task to process only those files starting with NCIS. MCEBuddy allows you to create your own custom file name and directory structure using the metadata stored in the file binary downloaded from the internet.

Sometimes the audio and video go out of sync due to corruption at the start of the video. DO NOT put this parameter in the general parameters section. You can play with the number to find the right mix, it can be as low as 3 or as high as 30 depending upon the corruption.

You often cannot see the corruption while play the video it will look okaythese are at the frame level and often ignored by players. Also try to play with the AudioDelay parameter given above. Set to skip to see if that resolves the issue. It is a trial and error process.

M4V AND your audio is going out of sync ONLY when you remove commercials i. See above for more details. Sometimes the Audio gets cut out completely in between a video. If it cannot find any custom metadata files, till try to extract the embedded metadata if the file supports it.

MP4, M4V, MKV, WMV etc. The Showname for a series is taken from SHOWNAME. Also, if MCEBuddy find buddy XML file created during the conversion process e. MCEBuddy looks for a EDL file along with the original source video with the same source video filename. If it finds the EDL file with the source video it copies the EDL file to the output directory along with the converted file.

MCEBuddy looks options a SRT file along with the original source video OR in the temp working directory with the same source video filename. If it finds the SRT file in either place it copies the SRT file to the output directory along with the buddy video with preference given to a SRT file in the temp working directory.

MCEBuddy gives preference to the Custom SRT files over the CC generated SRT buddy. Once generated, MCEBuddy will copy them to the output directory along with the converted file. MCEBuddy by default calculates how many threads are required for the programs to run optimally. However this can be overridden manually by specifying the threads in the general parameters in the profiles file for each profile and encoder 3.0. SkipCropping and AutoDeInterlace NOTE: MCEBuddy does not put quotes around the replacement parameters, some command expect quotes to be sure to put quotes where required.

This parameter tells MCEBuddy to use DirectShow to extract the audio and video streams from the WTV file and remux them into a TS file. The disadvantage is that it only support one audio and video stream in the WTV file.

This can be used when one wants to change the container format while retaining the original video without recoding it. NOTE: When using this option it possible that other underlying programs like comskip, ccextractor etc may not support the video codec options copied options may fail 3.0 function properly.

This 3.0 tells MCEBuddy to internally allow remuxing H264 video into a TS format without converting it to MPEG2 video first. This can be used when one wants to change the container format while retaining the original H264 video without recoding it. This parameter tells MCEBuddy to use Remuxsupp FIRST to remux WTV files before trying other remuxers. This can help with some videos rare that not remuxed properly with FFMPEG or other remuxers but work with Remuxsupp.

Usually Remuxsupp does not work well with many videos NOTE: This only helps in certain situations where files remuxed by FFMPEG are not able 3.0 be converted by MEncoder. This is only effective when Comskip is enabled and Custom EDL files are not provided. When the commercial removal option is set to Binary it tells MCEBuddy to force use the EDL file instead of the EDLP file from Comskip. NOTE: 3.0 default MCEBuddy uses EDL binary. TS files and EDLP for all others This is only effective when 3.0 is enabled and Custom EDL files are not provided.

When the commercial removal option is set to Comskip it tells MCEBuddy options use the EDLP file instead buddy the EDL file from Comskip.

TS files and EDLP for all others This tells MCEBUddy not to change source video resolution while buddy keep source resolution. This tells Options not to autodetect crop information and skip cropping the video. This helps when the video edges are being cut off or if you have a video options no black bars on the sides to be removed, it will speed up the conversion process. Auto cropping can also sometimes skew the aspect ratio, so setting this will make MCEBuddy skip cropping.

This parameter works only with ffmpeg and handbrake profiles. If this is enabled, MCEBuddy looks for a valid SRT subtitle file and if it finds one during the conversion process, it will use that SRT file to burn the subtitles into the video during conversion. This only works if the video is being encoded i. This only works if there is a valid SRT file. Once the subtitles have been successfully burnt the SRT file is deleted and not copied to options output.

This helps when the standard profile is failing or causing audio issues during the commercial removal stage. While this cutter can leave some artifacts where the video is cut, however it works on ALL file types and will work successfully without any audio sync issues. This can be used an option if commercial removal are failing or if a new file format is being used which is not natively supported by MCEBuddy. When is parameter is set it tells MCEBuddy to use the Universal Commercial Remover to remove the commercials before the conversion rather than the usual binary of removing commercials after buddy. This helps when the conversion is failing during the commercial removal stage.

This option is independent of UniversalCommercialRemover. There are two tools used to merge video segments after removing the commercials. This parameter can be set to force use of the tool. The tools are ffmpeg and avidemux. Occasionally ffmpeg can fail the merging but will not hang MCEBuddy.

When is parameter is set it tells MCEBuddy to use an alternative buddy for remove commercials from MP4 and M4V files after the conversion is complete. By default MCEBuddy uses MP4Box to remove commercials during the last step, if this parameter is set it will use MEncoder to remove commercials.

NOTE: This parameter is only effective when using using FFMPEG or Handbrake encoders. If this parameter is set, it tells MCEBuddy to do the Commercial Scan but NOT to cut the commercials.

Instead it will copy the generated EDL file to the output directory along with the converted file. Comskip generates 2 types of files, EDL and EDLP. Use the ForceEDL and ForceEDLP command to specify which file to binary. If this parameter is set, it tells MCEBuddy to copy the log file generated by comskip during commercial detection.

The log file is copied along with the converted file to the output directory. If this parameter is set it tells MCEBuddy to automatically detect the scan type interlaced, progressive or telecine of the video and override the profile parameters to optimize the quality of the video.

This parameter is set for each encoder type, e. This is useful for some file formats such as AVI where audio gets skewed on auto correction. If the value is equal to autoit adds or subtracts the delay specified to the auto calculated audio delay for the video. A value of 0 means that MCEBuddy will skip any delay correction. By default this this parameter is set to skip. By default MCEBuddy will look at the hardware encoding capabilities of the encoders specified in the order for that options and job at hand and will reorder the encoders to use the best hardware encoders first to optimize hardware encoding if buddy.

MCEBuddy can provide the user with an option to run a single command at the following points in this order during the conversion process: Refer to the Conversion Process Overview to understand the exact location of each Custom Command v At the very beginning of the conversion process just BEFORE extracting the metadata from the source file before the remuxing or commercial detection or conversion. This custom command can executed with the following parameters.

There is no information about the recording metadata. If your CustomCommandXXX line starts with a double quote and ends with a double quote, then you MUST enclose the ENTIRE line in an additional binary quote otherwise MCEBuddy will not be able to read it. NOTE: While running a custom command, the output is redirected to the log file with a debug log status.

CustomCommandHangPeriod represents the number of SECONDS MCEBuddy will wait during which if no output is detected and logged to the log file and it determines the process to be hung 3.0 kills it. Options it to to DISABLE hang detection. CustomCommandCriticalwhen this is set to trueMCEBuddy will fail the entire conversion if the custom command is invalid or if the process is terminated due to hang detection. By default the value is false. Use this parameter ONLY WHEN REQUIRED.

CustomCommandShowWindow v is set to 3.0 if you want MCEBuddy to show the window for the program it is running, false to hide the window. If the return code is 0 default it is considered a success, if not ve or -ve then it is considered a failure. Start the MCEBuddy application from the Start Menu.

Click on Stop to stop the MCEBuddy engine. 3.0 click Start on the Binary application. Open, edit and save it. The old version is preserved for your reference only. First the CopyRemux is used, if that fails then the SlowRemux is used CopyRemux is used first for MPEG2 video files to binary copy the video without recoding the video.

If the original video is not MPEG2 or CopyRemux fails then SlowRemux parameters are used to remux the video. THESE SHOULD NOT BE CHANGED UNLESS THE BACKUP REMUX IS COMPLETELY FAILING. Each of these entries will have a number after them like CopyRemux0CopyRemux1SlowRemux0SlowRemux etc. These numbers indicate successive remux parameters to be tried if the previous one fails, i.

This can be useful if you want to specify parameters before the input file in the FFMPEG parameter command. This can be disabled by removing -r auto. MCEBuddy monitors the Average Rate of Dropped frames and Average Rate of Duplicate frames, the key is average rate and not absolute value. If this exceeds a threshold then the auto detected frame rate is incorrect and needs to be corrected.

These thresholds can be specified in the parameters RemuxDropThreshold and RemuxDuplicateThreshold. If that threshold is exceeded you may need to manually specify the frame rate see above. If there is nothing specified then MCEBuddy will use the default subject lines. Refer to the Running Custom Commands for a liist of custom commands that can be used in options subject line. It will only record an error in the conversion log and continue the conversion.

If the recording is really copy protected then the final video will be look garbled. When this is set to falseif MCEBuddy encounters an Copy Protection flag it will stop the conversion after logging an error. By default, this value is true. If this is set to falsethen MCEBuddy will not download the Banner file artwork for the movie or tv series. This parameter can be set to set the CPU affinity mask.

This limits MCEBuddy to 1 or more processors only as specified in the bitmask. While this number is written as an integer, the integer represent a binary mask with each bit representing a processor. HINT: Convert the integer to a binary representation, each bit in the binary number presents a CPU processor.

This parameter is used to manually specific the temp working directory for MCEBuddy, i. By default MCEBuddy uses a directory called working within the MCEBuddy installation directory e. This parameter specifies how often MCEBuddy should check the Monitor Locations for new files. MCEBuddy registers this port with the any UPnP enabled routers on the network by default to enable remote connections from outside the network NAT This is the MCEBuddy GUI application should connect to for the local machine.

This parameter is used when the subtitles go progressively out of sync after commercials are removed from the video. This happens 3.0 when a video is cut, the video is aligned with the next GOP and I Frame sequence which can 3.0 a few seconds away from the actual options point.

Hence each time the video is cut the subtitles get progressively out of sync with the video. This setting is used to bring the subtitles back into sync with the video. This parameter specifies how long Buddy will wait for a console output from the application e. Use to disable hang detection i. MCEBuddy will wait forever for the process to exist normally. Include these parameters by right clicking on the application short cut in the Start Menu buddy add them to the target path startmin - Start the GUI minimized startengine - Force the engine to start after connection with engine is established e.

Once you download and install ShowAnalyzer it will show up as an option on the conversion profile settings page under commerical detection Filename and Showname Buddy Matching v MCEBuddy supports multiple wildcard name matching to match binary and filenames using the ; operator. You often cannot binary the corruption while play the video it will look okaythese are at the frame level and often ignored by players Also try to play with the AudioDelay parameter given above.

See above for more details Sometimes the Audio gets cut out completely in between a video. Once generated, MCEBuddy will copy them to the output directory along with the converted file MultiThreading Support v MCEBuddy by default calculates how 3.0 threads are required for the programs to run optimally. Occasionally ffmpeg can fail the merging but will not hang MCEBuddy e. By default this this parameter is set to skip E.

By default MCEBuddy will look at the hardware encoding capabilities of the encoders specified in the order for that system and job at hand and will reorder the encoders to use the best hardware encoders first to optimize hardware encoding if available Running Custom Commands v MCEBuddy can provide the user with an option to run a single command at the following points in this order during the conversion process Refer to the Conversion Process Overview to understand the exact location of each Custom Command v At the very beginning of the conversion process just BEFORE extracting the metadata from the source file before the remuxing or commercial detection or conversion.

TS file generated in the temp working directory if the source video is a WTV or DVR-MS file. Please note this will be blank if the source video is not a WTV or DVR-MS options. This can be useful if you want to specify parameters before the input file in 3.0 FFMPEG parameter command E.

If that threshold is exceeded you may need to manually specify the frame rate see above E. Refer to the Running Custom Commands for a liist binary custom commands that binary be used in the subject line e. HINT: Convert the integer to a binary representation, each bit in the binary number presents a CPU processor E. MCEBuddy will wait forever for the process to exist normally E.

Popular Videos - Binary option & Web page